Sew OrgaNiced Assembly Kit

➤ SIZE (L x W x H) | 15x50mm

➤ SCOPE OF DELIVERY | 10-piece assembly kit, consisting of 2x [3.5 x 50 mm SPAX universal screws, countersunk head, Phillips]; 2x [5 x 25 mm Fischer Duopower dowels]; 2x [3-piece Schnittenliebe spacer set, 3D printed (including cover cap) in white]; 1x step-by-step assembly instructions

➤ MATERIAL | The 3D printed products are made of modified polyethylene terephthalate (PET-G for short). This is a thermoplastic that most people know from PET bottles. It is stable, dirt-resistant and can be used safely in the home with children.

➤ CARE | The 3D printed products are made of robust PET-G plastic. This material is not only stable and very durable, it is also dirt-repellent and waterproof, making it easy to clean. It is usually sufficient to dust the products with a slightly damp cloth. If they are very dirty, you can simply rinse our Skadis perforated plate accessories with a little detergent and lukewarm water.

➤ INSTALLATION | To use the mounting kit, a hole must be drilled in the wall. Detailed step-by-step instructions are included in the product.

➤ What do I need the mounting kit for?
The kit stabilizes the IKEA Skadis pegboard by providing two additional fixings to the wall. This means that the board does not protrude even under heavy loads and remains firmly attached to the wall during heavy use.

➤ Where should I attach the mounting kit?
It is recommended to fix the plate in the lower area on the left and right with the kit to ensure maximum stability.

➤ Can I use the mounting kit on a perforated plate that has already been mounted?
Yes, the mounting kit can easily be retrofitted to provide additional stability to your existing perforated plate.